Remove a Stump Without Difficulty : The 4 Techniques

Remove a Stump Without Difficulty : The 4 Techniques

If cutting a tree is already in operation in itself, there is one more delicate task: removing the stump. Indeed, the stump of a cut tree does not easily remove. And for a good reason, the tree will have had the time to develop its roots underground and thus to establish its grip on your land. So, how is it possible to remove the stump from a tree? We have gathered for you all the methods!

Why Want to Remove a Strain?

It is common to have to cut a tree in your garden, either because it is too high, because it has become dangerous or because it blocks the sun. But cutting a tree does not permanently eliminate its presence.

Indeed, every tree has its roots in the depths of the earth. As a result, the stump of a cut tree will never fall naturally. As a general rule, the older and more imposing the tree, the more difficult the strain will be to remove.

It is not mandatory to remove the stump from a cut tree. In contrast, a tree stump is often unattractive or prevents you from landscaping your garden as you see fit. If a strain disturbs you, it will have to be removed.

Remove a Stump Without Difficulty : The 4 Techniques

How to Remove a Stump : The Different Methods

Rest assured: There are several ways to remove a stump from a field safely. This task is also quite easy, provided you have the right method.

We have gathered for you four different ways to eliminate the stump of a tree:

1. Manually Remove a Stump

Let’s start with the most natural technique. If it requires a little elbow grease, this method is safe for you or the environment. It will simply consist of manually removing the stump, using different tools.

Unfortunately, this technique will not be suitable for the largest strains, or the deepest roots.

To Use This Technique, You Will Need:

  • A shovel
  • A pruner or electric saw
  • An Axe
  • A Hoe
  • Electric Chainsaw
  • Work gloves
  • A suitable outfit
  • Protective glasses
  • Potting soil

Here’s How to Proceed:

  1. Dig Around the Stump: with the shovel, start by clearing the soil all around the stump. You must let the different roots appear all around the tree. Start by digging right next to the stump, to reveal the most imposing roots. The deeper you dig, the easier the removal of the stump will be.
  2. Cut the Roots: once the roots are uncovered, they will have to be pruned. The tool needed will depend on the thickness of the root. If you can use a simple pruner, it will be perfect. Otherwise, get an electric saw or an ax. Follow the safety rules, and never use a tool that you do not control.
  3. Remove the Roots: cut the roots into small pieces, and gradually remove all loose pieces from the ground. Then remove the roots with a hoe. If necessary, cut the remaining roots again before removing them. Remove as much root as possible to ensure correct removal of the stump.
  4. To Cut the Stump: once a maximum of roots removed, you can cut the stump using a chainsaw. Keep the wood for heating or throw it in the compost.
  5. Bridging the Hole: to keep the ground flat and avoid any accidents, fill the hole with potting soil. This is an important step, otherwise your land may collapse around the hole. Once a month, add a little more potting soil until your land is perfectly flat.

This method has the advantage of not using any chemicals, and therefore to respect the nature and your terrain.

However, it requires a lot of energy and attention, especially when using cutting or electric equipment.

Remove a Stump Without Difficulty : The 4 Techniques

 

2. Burn a Tree Stump

Another natural but more delicate method will be to set fire to the tree stump. Here, you will use fire to overcome the stump and eliminate it permanently.

Warning: this method is more complex than it seems, and requires attention at all times.

With This Method, You Will Need to Gather:

  • Firewood
  • Twigs
  • Newsprint
  • A shovel
  • Work gloves
  • A suitable outfit
  • Protective glasses
  • Fire extinguisher
  • Potting soil

Here’s How to Get Rid of a Stump With This Technique:

  1. To Prepare the Fire: it is necessary to start by putting wood all around the stump. The stump must be completely covered with heaps of wood, and located in the heart of the pyre. The idea is to use directly the wood of the cut tree.
  2. Start the Fire: once the wood is in place, use twigs or newspaper to start the fire, and make sure it takes. Better already have an experience to light a fire.
  3. Watch the Fire: A stump does not catch fire in a few minutes. It will take several hours for the flames to burn. In the meantime, you must watch the fire and make sure it does not go out. The stump must burn completely, after which you can let the fire go out.
  4. Clean the Hole: once the fire is out, clear the ashes with a shovel, and discard them. Check that there is no more embers, to avoid any fire.
  5. Fill the Hole: as in the previous method, fill the hole with potting soil so that it does not distort your terrain.

Keep in mind that lighting a fire is always dangerous. Provide emergency equipment (fire extinguisher, blanket) and do not use flammable products.

Remove a Stump Without Difficulty : The 4 Techniques

 

3. Use a Stump Trimming Machine

The third non-chemical method will require the hiring of specific equipment: the stump cutter.

Sometimes referred to as a stump sprayer, this mobile machine equipped with a tungsten carbide disc literally allows you to trim the stump, and make it disappear.

To Use This Method, You Will Need:

  • A stump trimming (possibility to rent this unit from a professional)
  • A shovel
  • Work gloves
  • Protective glasses
  • Noise-canceling headphones
  • A helmet
  • Safety shoes
  • A suitable outfit
  • Potting soil

The Use of a Stump Trimming Will Happen in the Following Way:

  1. Place the Device Above the Stump: the trimmer is a mobile device, which should not be difficult to position.
  2. Operate the Device: once the machine is in place, use the various levers to activate it and rotate the disk. Manage lateral movements and cutting height to trim the entire stump. In no case should you approach the disc while the machine is running?
  3. Clean the Hole: Once the stump cutter has done its job, it remains to clean the hole. Use a shovel to clear all wood chips and dirt. Remove what is left of the stump and discard the debris.
  4. Fill the Hole: As in the previous methods, take the time to fill the hole with potting soil.

This method has the advantage of removing the strain without exhausting you! As you do not use a chemical, your land stays perfectly clean.

Even if the use of a stump cutter is secure, keep your precautions at the time of use. If you do not feel comfortable using this material, you can bring in a professional who will use it for you.

Remove a Stump Without Difficulty : The 4 Techniques

4. Remove a Chemical Strain

The last method we present to you is simply the use of chemicals. Products such as sodium chlorate make it possible to accelerate the decomposition of a strain, and thus to facilitate its removal.

To Use This Method, You Will Need:

  • An electric drill
  • Sodium chlorate
  • An Axe
  • A shovel
  • Firewood
  • Protective gloves
  • Protective glasses
  • A mask of protection
  • A suitable outfit
  • Potting soil

Here’s How to Trigger the Chemical Decomposition of a Strain:

  1. Secure Places: You will use harmful products. Make sure neither children nor your pets can get close to the stump.
  2. Drill the Stump: Using a large drill, drill holes inside the stump. Make about one hole every 10 centimeters, to a depth of 20 centimeters. The entire surface must be covered.
  3. Apply the Product: Pour your stump-destroying product directly into the holes. For this, wear the appropriate protections and carefully read the product manual. Remember that these products are dangerous, and therefore should be handled with care. Once the product is poured, seal each hole with a cork. Make sure that no one can approach the stump.
  4. Wait: A stump-destroying product usually works in a few weeks. It should soften the stump and allow it to be extracted more easily. When you feel that the strain is soft enough, it will be time to remove it.
  5. Remove the Stump: once the stump is soft, you can extract it from the ground with an ax and a shovel. Clear all the pieces one by one.
  6. To Burn the Stump: Very often, it is necessary to burn the remains of stump so as to remove all the roots. Follow the instructions in our second method to find out how.
  7. Fill the Hole: once the stump is burned, remove the ashes with a shovel, and fill the hole with potting soil.

Remove a Stump Without Difficulty : The 4 Techniques

Conclusion

Contrary to what we can hear, the use of a chemical will not necessarily facilitate the removal of a tree stump.

As this product is potentially dangerous, we will prefer one of the other methods, more environmentally friendly.

In case of doubt or difficulties on the way forward, do not hesitate to hire a gardener to clear your stump. It’s still the best way to get rid of a stump quickly and safely.

 

 

Click Here to Leave a Comment Below 0 comments

Leave a Reply: