Eavestrough Repair in the Fall Season

Last Updated on August 13, 2020 by Daniel Cooper

Eavestrough Repair in the Fall Season: Many homeowners admittedly don’t spend much time thinking about their eavestroughs. Yet, when it comes to preventative maintenance that stops gutter problems before they start, knowing some basics about eavestrough repair is all you need.

Even though eavestroughs are made to resist the weather, by the time autumn comes around, they are going to be filled with sticks and leaves from spring and summer.

Eavestrough Repair in the Fall Season

Here are some tips and tricks about eavestrough repair for this upcoming fall season:

Typical Eavestrough Damage

The usual suspect to eavestrough damage would be the collected debris that congests your gutters and causes clogging. Depending on where the eavestrough gets backed up, the water could back up towards the roof, causing damage to nearby fascia, siding, window frames, and the roof.

Clogged or leaking eavestroughs can also wreak havoc on your house’s foundation. Since water will be overflowing, it’s not going through the downspout, where it gets transported somewhere safe. Instead, the water will collect around the house and may flood the basement.

Leaky Eavestrough Repair

First, check the seams. Metal gutters typically start leaking when the seams come apart or have corroded. On the other hand, vinyl gutters are usually connected by gaskets that can wear down throughout years of inclement weather.

To repair these kinds of leaks on joint or metal gutters, you can clean the area where the leak has started and chip away any of the old sealants. Once that’s been removed, apply silicone caulk.

Make sure there’s enough time for the caulk to dry. On a vinyl gutter, you replace bad gaskets with a new one purchased from the local hardware store.

If you notice rust patches that look like they could start leaking, scrape the area clean with wire brush then cover it with paint thinner. Next, cut a fiberglass patch to cover the damaged section by at least 5 cm on all sides.

Saggy Gutter Repair

Another common problem that people see would be sagging eavestroughs. Usually, when the gutter begins sagging, it soon causes water to pool in this lowered section, causing overflow from the eavestrough as well as improper flow coming from the downspouts.

There are two reasons sagging gutters happen. The first is a loose or missing nail or screw, which can be replaced or tightened to correct the issue. In the event a bracket has come loose, you will need to refasten the bracket to another spot along the roof.

Another way to fix eavestroughs that are slightly sagging would be the straighten them out by using a fastener. The common method is a spike fastener that gets placed between the gutter and a sleeve inside the structure called a ferrule, as well as into the end of a roof rafter.

Eavestrough Repair in the Fall Season

The Lifespan of Gutters

Keeping up with maintenance and ensuring swift eavestrough repair will keep the gutters on your home for at least twenty years. However, depending on materials, climate, and other considerations, the longevity of a gutter system can and will change.

That is why it is important to do routine care on your eavestroughs at least once a year, as well as having them inspected by a professional.

Aluminum and galvanized steel gutters are not as typical anymore, but you can expect them to last about twenty years. If you’re looking for metal gutters that last a long time, then copper gutters are an ideal choice because they last about fifty years or more.

However, you need to keep in mind the upkeep! Vinyl gutters are another option because they are inexpensive and much easier to install and repair.

That said, these eavestroughs don’t have the same amount of durability as their metal counterparts. Another thing to keep in mind is that vinyl gutters aren’t cut out for colder climates, because it can become brittle and break easily.

Either way, by performing some routine maintenance on your home’s eavestroughs, you can avoid extensive repairs and replacements in the future. Doing so will also protect other sections of your home from harm.

To make sure you are keeping up with preventative maintenance, it is smart to schedule inspections once a year to see what needs to be done or to have scheduled eavestrough repair by a professional at least once a year.


You May Also Like to Read